Western Telematic 12651 Manuel d'utilisateur

RPB+Remote Power Boot SwitchPreliminary DraftMay, 1996User's Guide

4.1. The Power-Up Default StringThe Power-Up Default String allows the user to select defaultOn/Off conditions for each switched AC outlet. When the R

5. OperationThe device connected to the Control Port must send ASCIIcharacters at the same data rate as the RPB+. The unit accepts 8bits no parity, or

6. Set Plugs to Default: To set all plugs to the Power-UpDefaults, type /D [Enter]. Note that if the Default Stringincludes missing or invalid charact

Appendix A: SpecificationsSwitched Power Plugs: 5 code-selectable AC plugs rated 15 ampsmax. Each. Total switched power for all plugs not to exceed 15

Customer ServiceCustomer Service hours are from 8:00 AM to 5:00 PM, PST,Monday through Friday. When calling, please be prepared togive the name and ma

· ···

1. IntroductionNetwork equipment sometimes "locks-up", making it impossibleto communicate. The RPB+ Remote Power Boot Switch canswitch AC po

2. Unit Description2.1. Front PanelAs shown in Figure 1, the RPB+ front panel includes a series ofLED indicators which function as follows:ÀPOWER ON:

2.2. Back PanelAs shown in Figure 2, the RPB+ back panel includes thefollowing items:ÀSwitched AC Outlets (Plugs1-5): For connection to upto five AC d

3. Installation3.1. SetUp SwitchesThe SetUp Switches select the baud rate and Off Time, andenable/disable the Password feature and Read Only Mode. Ifs

3.2.1. Connecting to a ModemWhen connecting directly to an external modem, use a standardAT to Modem cable. Make certain the modem is initialized atth

4. Start-Up / Configuration1. Access the RPB+ Command Mode: The RPB+ istransparent to parity and will accept 7 or 8 bit characters,but will always ans

b) Password: To re-define the password (Default =[Enter]), key in the new password (up to 8 characters)and press [Enter]. The password can include bla